Купить оборудование для быстрой экстракции сухим льдом у производителя
It will help to knock out the most valuable thing!! What you just throw out without noticing!
We will help you make money on expenses and get out of the garbage: stick-stems, semak, foliage, inflorescences=the most valuable thing. Awesome-necessary thing, both for a huge amount and for a small zhmenka).
It is also possible to peel or peel the seeds from flowers.
And also to produce ice extraction by filling buckets with ice water and ice, working as a mixer. You will be able to filter the water. Filter product from 20-150 microns (20 microns filter must be purchased in addition)
All parts are sealed and tightly closed with lids for super shaking. All meshes are stainless steel.
Bucket capacity 3.3 liters, 5.8 liters and 11 liters.
Dry ice extraction technique:
1. First of all, we take the container with the smallest sieve. We fill it with raw materials and dry ice. The quantity should be no more than 30% of the volume of our container. Then we place the sieve container in a container with a bottom, tightly close the lid. Now you need to create a good SHAKE. We shake strongly, intensively with a large amplitude so that the raw material with ice beats as hard as possible and more often against the walls and mesh in order to get the BEST result. SHAKING is the most important thing. It is necessary to understand that the quantity and quality of products depends on it. After all the best came out, we got 1 fraction from 0-70 microns.
2. We pour the remaining raw materials from the first container into a sieve container with large cells. We repeat the shaking process, as described in paragraph 1. After shaking in a container with a bottom, we got the product: 2 fractions from 70 to 100 microns.
3. The last stage of dry extraction. All that remains from the second sieve container we pour into a sieve with large cells. We also repeat the shaking process as described in paragraph 1. In the end, we get 3 fractions from 100 to 150 microns.
After all the dry extraction processes described above, we again have raw materials that some call garbage and simply throw away.We suggest you use a butane extractor afterwards. Which will help to extract valuable components from the "garbage".