Отражатель ДНАТ V-Air XL у производителя

indicationXLindicates an increased size of the reflector in comparison with the conventional model. Indeed, a new reflectorDNAT V-Air XLsignificantly more. The dimensions of DNAT V-Air XL are 650 mm X 500 mm X 200 mm, while the weight is only 1300 g.

ReflectorDNAT V-AirXL equipped with a passive heat dissipation system.The reflector has a complex configuration, consisting of a biparabolic splitter of the lamp molasses and two side reflective elements fixed at some distance from each other.

The air heated by the lamp rises and is discharged outside the reflector, which allows you to achieve a lower temperature directly under the lamp.This is extremely useful when the height of the space for growing plants is limited, and also allows you to position the reflector closer to the plants.

The main bracket of the HPS V-Air XL reflector is made of 2 mm thick steel, it can withstand the weight of any HPS lamp without changing the geometry of the axial location of the lamp.

The lamp socket is fastened through the slider using the “Lamb” nut, which allows, without a tool, to adjust the location of the lamp relative to the reflector, therebychange focus. The lower and farther the lamp is from the reflector, the wider the illuminated field, and the higher and closer to the reflector, the denser and already effectively illuminated space under the lamp.

An entry gland is installed on the upper part of the bracket for convenient fixing of the wire.

The reflector is made of special anodized lighting aluminum Alanod, which haslight reflection 98%, And hishoneycomb structure distributes light evenlyfrom lamps, without creating burning lenses on the leaves of plants.

The reflector is supplied in a box, partially assembled. Assembly takes less than 2 minutes. Only 4 screws need to be screwed in with a Phillips screwdriver.

Cartridge E40

Dimensions: 650 mm X 500 mm X 200 mm